PHOTON AND SCALAR SYSTEM (MPS 912)
The Photon and Scalar System (MPS 912) is an extraordinary device combining multiple radiations such as photon (light) with the pulsed magnetic field (PEMF), scalar field, and different frequency modulations such as Schumann and sunlight noise. Photobiological cellular stimulation sounds like “Star Trek” medicine, something out of the future that seems too far-fetched to exist in today’s world. However, photons are a reality, and today photobiological stimulation is poised to become an essential technology in wellness practice for the years to come.
Photons have a stimulating action on the genetically programmed cells. MPS 912 transfers photons onto the hand’s palms, feet, or with different other optional accessories (applicators); they do infuse photons on other specific body parts. The photons highly efficiently transmit information. MPS 912 is a multiverse photon compact system: it can deliver stimulative radiations from laser, biophoton, color, magnet field, brain frequency generator; it allows any external modulation input based on external audio signals; it transmits biological signals or imprint carriers, water. It is a top of the line photobiological system using modern, highly efficient LED with a broad spectrum. The accuracy and precision of modulated signals generated by MPS 912 are unbeatable on this market, where cheap imported products do significantly fail to deliver an efficient stimulation due to their questionable quality.
MPS 912 can be used in three different modes:
- As a source of photons with a free adjustable amplitude modulation in the frequency range from 0.5 Hz up to 9999 Hz
- As a source of photons modulated by a well known beneficial solar noise, which has a powerful cellular regeneration effect
- As a photon source generated through the conversion of sound signals emitted in the range of 2 Hz – 20 Kilohertz by other external sources, you can transmit and imprint like this remedy’s signals like, for example, homeopathic, herbs, minerals, vitamins, any medicines.
Control unit with conductive glass hand and foot electrodes
With the central functional knob, you can change all parameters and adjust the stimulation procedure to your physiological targets (customize); by selecting and pressing the function keys F1, F2, F3, F4, you can choose the colors and their intensity in steps of +/-5% applied through the glass electrodes; these selections can be saved when pressing the corresponding key for some seconds until a signal ton confirms the recording of your selected frequencies. All other colors channel not desirable for your procedure must be nulled. Do not select more than 2 color channels on 100% intensity simultaneously; this may cause hand electrodes to warm up.
With the central functional knob, you can also select the desired mental and psychoactive frequencies; press first the key “FREQ,” and the display will show “POLY-FREQUENCY.” Turn the knob to the left; it will appear the word “Extern.” Turn now the knob to the right, and “poly-frequency” will be displayed. The below shown psycho-mental frequencies are characteristic for different brain activities:
- Super-delta: 1.20 Hz
- Delta: 2.40 Hz
- Theta 4.6 Hz
- Global 7.81 Hz
- Slow Alpha: 8.20 Hz
- Alpha: 11.20 Hz
- Low Beta: 16.60 Hz
- Beta: 33.50 Hz
- Gamma: 76.00 Hz
- If you turn the knob quickly to the right, you can select the numbers before the comma; turning the knob slowly will change the numbers after a comma. The above-selected frequencies can be saved using the keys F1-F4
- With the central knob and the key “TIME,” you can choose the stimulation duration: the time range can be selected between 30 seconds up to 30 min, the recommended duration is 3-10 minutes.
- To start the procedure, you must check that the three parameters: electrode’s color, frequencies, duration, were select according to your targets.
- When you connect with an external frequency source, the stimulation starts when the external frequency device is switched. External frequency devices can be audio, MP3 players, magnetic, scalar systems, lasers.
Standard is one pair of light conductive glass hand electrodes.
- Optional electrodes are magnetic field coil (MTK 270), which has the intensity and characteristics of a primordial undisturbed Earth magnetic field; if an audio signal is used for modulation, the coil will be synchronically modulated.
Magnetic field coil MTK-07
- Scalar informational stimulation is made possible by using the feet electrodes MPS-M 912
- Remedies information can be transmitted via photons directly to your body or neutral carriers.
- Remedies imprinting: combining scalar information with the light waves makes the remedies’ imprinting more precise and potent. The generated remedies will last for a much longer time than informational scalar waves imprint (radionic devices). This can be done by using the Information’s Transfer System; ITS 912. In this case, the remedies imprinting procedure is achieved with high-intensity photons
Remedy maker, ITS 912
- Laser or ultrasound applicators can also be connected using the Auxiliary ports
Control unit with AUX ports for optional electrodes
- 2 x 1 four highly efficient LED
- Wavelengths: 450 nm, 525 nm, 630 nm, white neutral
- Modulation: Amplitude modulation with multiple frequencies in the range AC 0.5 Hz -9999Hz, 2 channels
- Magnetic field (coil): 400 micro T, noise spectrum 0.6Hz-600 Khz, Día 220mm, 270 mm, 440 mm
- Audio signal external: 2 channels AC 0.5 Hz – 9999 Hz
SCOPE OF DELIVERY:
- Control unit MPS 912 (1)
- Photonic hand electrodes (2)
- Power unit AC 100-260 V/7.5 V DC (3)
- Imprinting remedies unit ITS 912
- PEMF magnetic coil
- Connecting cables (2)
- Foot electrode MPS-M 912
- Adapter for remedies vials (4)