Description
IONO-TRANS ESSENTIAL
The galvanic device IONO-TRANS Essential (IRE) is a home device portable, affordable, and versatile energy stimulation system. It works with galvanic current, is battery operated, and delivers DC free of any vibrations or modulating pulses. The maximum galvanic current intensity is two mA. It comes with different highly conductive electrodes, which can be connected to the red (+) and the black (-) socket jacks so that you can simultaneously stimulate two different body zones. It can be handheld; you can optionally buy a socket for the device or hook it on a belt.
HOW TO START A GALVANIC STIMULATION:
Before you start a targeted galvanic STIMULATION, it is recommended to prepare your body:
- Week 1 Improve the General Condition of the body.
Daily for 20 – 60 min, take one red electrode (+) in your left hand and one black (-) for the left foot, use 0.1-1.2 mA, increasing slowly time and current intensity. - Week 2: Activation, detoxification, consolidation, energizing
Daily for 20 -60 min, take one red electrode (+) in your right hand and one black electrode (-) under the right foot, use 0.1 – 1.5 mA, increasing slowly time and current intensity. - Week 3: Regulation, energizing, regeneration
Daily for 20 -60 min, take one red electrode (+) in your left hand and one black (-) for the left foot, use 0.2 -0.5 mA. - Week 4: Basic autoregulation
Daily for 20 – 60 min, take one red electrode (+) in your left hand and one black (-) in your right hand, use 0.10-0.20 mA. - Week 5: Stimulation and Activation
Daily for 20 – 60 min, take one red electrode (+) in your left hand and one black (-) in your right hand, use 0.30-0.40 mA. - Week 6: Blockage resolution, Energizing
Daily for 20 – 60 min, take one red electrode (+) in your left hand and one black (-) in your right hand, use 0.30-0.40 mA; in the Evening, change the current 0.03 – 0.05 mA. - Stimulating the body: use a black neckband (-) electrode and a red (+) on the feet using water immersed electrodes. The neck must be outside the water, and while the body is immersed in water up to the shoulders, a sitting position is recommended. Time is 20 min with 0.5 -1 mA. These are settings for a refreshing galvanic bath, preferably to take such a galvanic bath by the latest 4 PM.
- Stress relief: to relax and relieve stress, the body position is the same as above described, but the placement of the electrode is different: feet receive a black (-) water electrode, and neck receives a red (+) electrode, same 0.5 -1.5 mA for 10-20 min. This galvanic bath is recommended for the evening time for a good and restful sleep
- Be well hydrated and get into a relaxed position; quiet your mind. The skin where you are going to apply the electrodes must be well cleaned, free of cosmetics, and slightly moisturized with water
- Wrap each electrode or add between the skin and electrodes a felt or cotton dump wipe to enhance the electrical conductivity
- When beginning the stimulation session, start increasing the current slowly over 3 minutes when shutting down the device. It is recommended to inverse every 20 minutes of the polarity to avoid skin polarization. At any time of the stimulation procedure, you must feel a comfortable tingling in the body
SOPE OF DELIVERY
- Control unit with Max. Current two mA
- Battery-operated system
- Two pairs of highly conductive silver electrodes
- 2” X4” Rectangular Professional Unit Pads, 3rd Gen Japanese Gel Latex-Free Electrodes (Health Canada and FDA Approved), Upgraded Self-Stick Performance, Skin Friendly and Non-Irritating
- Manual in English
Reviews
There are no reviews yet.